Tent Mirror Removal for Recoating

Tent Mirror Assembly drawing is D3605.

- Rotate to mech PA 90deg per D0002.
- Set manual brake and leave hand paddle set on manual rotation.
- Remove hatch cover.

Inside DEIMOS:
- Remove dummy tent mirror D3607-1.
- Remove spring on Piezo actuator.
- Secure Piezo to prevent damage.
- Remove clips D3604-6 from both sides.
- Lift mirror out of mounts and put in carrying case.
- Pass out of DEIMOS.

For Recoating:
- Remove caps D3604-2 from both sides.
- Flex bearings D3601-1, pinsD3604-7, and mounts D3604-1, are matched parts. Mark during disassembly so they will put back together properly.
- Use tool D3108 to remove taper pins D3604-7, and flex bearings D3604-1.

Reassemble in reverse order.